2-piece rear driveshaft requires carrier bearing drop kit D5505. Will not fit dually applications. Rear axle diameter will be 3.5" or 4", measure before ordering. Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary.
If driveline vibration is present, some 6 kits may require the transfer case indexing kit (D5805). See installation instructions (step 17) for fitment details.Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height so net lift gain will be 4" over stock. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring. Verified fit Dodge/Ram Ram 2500/Ram 3500/2500/3500 2009-13 (2009, 2010, 2011, 2012, 2013). Please ask us for a full technical details at the questions field at bottom of the page.
This product fits the following applications. 2009 Dodge/Ram Ram 2500 4WD.2010 Dodge/Ram Ram 2500 4WD. 2011 Dodge/Ram Ram 2500 4WD. 2012 Dodge/Ram Ram 2500 4WD. 2013 Dodge/Ram Ram 2500 4WD.
2009 Dodge/Ram Ram 3500 4WD. 2010 Dodge/Ram Ram 3500 4WD.
2011 Dodge/Ram Ram 3500 4WD. 2012 Dodge/Ram Ram 3500 4WD. Sport Truck USA Zone Offroad Products was developed to bring you quality offroad products at the BEST VALUE in the industry.Zone Offroad is an engineering & manufacturing division of Sport Truck USA with over 20 years of experience serving offroad enthusiasts. This new Zone Offroad 6" suspension system for the 09-13 Dodge Ram 2500 & 09-12 Dodge Ram 3500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4 steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. In addition to the control arm brackets, all the necessary additional components are included.
Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts.A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft. Unique upper and lower control arm relocation bracket design. No cutting of the frame required. High performance at a low price. Our specialization is a delivering the best products & service in the fast manner possible!
Thousands of positive feedbacks guaranty our quality. Once delivered and inspected we then send out a replacement.
Any product you return must be in new, unused, resalable condition and in the original packaging. Please ensure that the item you're returning is repackaged with all the hardware, ties, bushings, additional items and documentation that were included when you received it. By purchasing this item you verify that you have read and agree to all of out terms and conditions of sale. This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lift Kits & Parts".
The seller is "dvinternationaltrading" and is located in this country: US. This item can be shipped to United States, Canada.