2-piece rear driveshaft requires carrier bearing drop kit D5505. Will not fit dually applications. Rear axle diameter will be 3.5" or 4", measure before ordering. Minor trimming may be required with some tire/wheel combinations.
A front bumper spacer kit (D5801) is available to gain clearance if necessary. If driveline vibration is present, some 6 kits may require the transfer case indexing kit (D5805). See installation instructions (step 17) for fitment details. Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height so net lift gain will be 4" over stock.Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring. Front Lift Method: Coil Springs. Rear Lift Method: Block Kit. Wheel Size: 17 X 9. Max Tire Size: 37 X 12.50.
This product fits the following applications. 2006 Dodge/Ram Ram 1500 Mega Cab 4WD Gas.2007 Dodge/Ram Ram 1500 Mega Cab 4WD Gas. 2003 Dodge/Ram Ram 2500 4WD Gas. 2004 Dodge/Ram Ram 2500 4WD Gas.
2005 Dodge/Ram Ram 2500 4WD Gas. 2006 Dodge/Ram Ram 2500 4WD Gas.2007 Dodge/Ram Ram 2500 4WD Gas. 2003 Dodge/Ram Ram 3500 4WD Gas. 2004 Dodge/Ram Ram 3500 4WD Gas. 2005 Dodge/Ram Ram 3500 4WD Gas. 2006 Dodge/Ram Ram 3500 4WD Gas. 2007 Dodge/Ram Ram 3500 4WD Gas. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings.
The 1/4 steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. In addition to the control arm brackets, all the necessary additional components are included.Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft. Unique upper and lower control arm relocation bracket design. No cutting of the frame required. High performance at a low price. Our specialization is: delivering the best products & service in the fast manner possible.
Thousands of positive feedbacks guaranty our quality. RA must be requested up to 30 days after the item is delivered. Any RA requested after the 30 day cutoff will be declined.
Incorrect/damaged merchandise MUST be reported 3 days after receiving the item. Any and all return requests will be handled at the discretion of Dvinternational company. By clicking the Place order button you are authorizing the above total to be billed to your card and the sale is final.NO CREDITS OR CHANGES CAN BE APPLIED ONCE YOUR ORDER IS CONFIRMED. By purchasing this item you verify that you have read and agree to all of out terms and conditions of sale.
This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lift Kits & Parts". The seller is "vanautosale" and is located in this country: US.
This item can be shipped worldwide.