Rear Lift Axle

HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop

HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop
HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop

HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop    HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop

WILL NOT FIT Early 1999 F-250. Expands to Support 2" to 6" of lift. Achieve Correct Length in Minutes. Eliminates Constant Removal of Trackbar. Fastest Axle Alignment Correction on Market.

Precise Product Engineering for Superior Fitment. Easy and Fast Installation with Basic Hand Tools. Simple Instructions for Do It Yourself Instalment. Introducing our Newest Product: Polyurethane Bump Stops. HeavyMetal is excited to supply these lift Kits with our Polyurethane bump stops that can be used as replacements for worn factory units, independently, or accompanying pre-existing stops. This extra level of protection is geared toward saving you costly repairs down the road due to excessive bottoming out, or over extension of the suspension. Made from a proprietary polyurethane blend & molded with high-strength grade-8 studs to provide the right combination of dampening & longevity with no hazard of breaking hardware from repeated off-road abuse.

All of our steel components are finished using a proprietary teflon-blend coating. This provides the most durable and corossion resistant finish to withstand even the toughest abuse, on and off-road. WHY DO I NEED AN ADJUSTABLE TRACK BAR? Your OEM trackbar was designed to function at the stock vehicle height.

Due to the location of your trackbar and the way it is installed, as you lift your truck your axle begins to pull in a skewed direction. By extending your track bar, it corrects for lifts from 2" up to 6", but please ensure that the lift on your truck is from body and not from axle. DO I NEED AN ALIGNMENT AFTER INSTALL? A wheel alignment is always recommended after any components of a vehicle's suspension have been altered. This includes disassembly and reassembly.

Having a proper wheel alignment will ensure proper vehicle control during on and off-road driving conditions, as well as help maintain even treadwear over your expensive tire investment. I NEED HELP, WHAT CAN I DO? Heavy Metal reserves the right to make changes to the material, design, and specifications of the replacement item without prior notice. This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lift Kits & Parts". The seller is "heavymetal-suspensions" and is located in this country: US.

This item can be shipped worldwide.

  • Material Bump: Polyurethane
  • Bump Specs: Height 2.2" Diameter: 2" Single Stud Mount 3/8-
  • Color: Black / Red
  • Finish: Powder Coating
  • Compatibility: FORD F-250 SUPER DUTY
  • Lift Height: 2"-6" Lift Adjustable Track Bar
  • Interchange Part Number: Steel Adjustable Track Bar Bump Stop, On-Vehicle Turnbuckle Adjustability, Beefy Tubing / Thick Heavy Metal, 735(Bump2)(hm) HM0400, BB-HM 735(Bump2)(HM)\tB07G2K1GB9, Correct Skewed Axles / Superior Fitment
  • Adjustable: Yes
  • Manufacturer Part Number: 26448
  • Part Type: Suspension Lift Kit
  • Included Hardware: Bump
  • Placement: Front, Left, Right, Rear
  • Global Trade Item Number: Does No Apply
  • Other Part Number: 26448 1999 2000 2001 2002 2003 2004
  • Brand: Heavy Metal Suspensions
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No
  • Drivetrain: 4WD 4x4 / 2WD 4x2
  • Warranty: Lifetime
  • Installation: Easy / DIY Instructions
  • Material: 1/4" Cold Rolled Steel
  • Manufacture: Precision HD Plasma CNC Cut / Welded
  • Track Bar Specs: 2" - 6" ADJUSTABLE / 4 Pinch Bolts


HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop    HM Adjustable Track Bar For 1999-2004 2-6 F250 Lift Kits with Bump Stop